TP-Link TD-8816 manual Assign Vlan Pvid for each Interface

TD-8816

ADSL2/2+ Ethernet Router User Guide

can communicate as if they were attached to the same wire, when in fact they are located on a number of different LAN segments. Because VLANs are based on logical instead of physical connections, it is very flexible for user/host management, bandwidth allocation and resource optimization. There are two types of VLAN as follows:

Port-Based VLAN: Each physical switch port is configured with an access list specifying membership in a set of VLANs.

ATM VLAN: Using LAN Emulation (LANE) protocol to map Ethernet packets into ATM cells and deliver them to their destination by converting an Ethernet MAC address into an ATM address.

Figure 4-21

1.Assign VLAN PVID for each Interface

Click Assign VLAN PVID for each Interface in Figure 4-21,you can assign the PVID for each interface in the next screen (shown in Figure 4-22).

Figure 4-22

¾PVID: Each physical port has a default VID called PVID (Port VID). PVID is assigned to untagged frames or priority tagged frames (frames with null (0) VID) received on this port.

29