TP-Link TD-8840 manual ADSL2+ Modem Router User Guide, Mschap

TD-8840

ADSL2+ Modem Router User Guide

Figure 4-6

¾PPP Username: Enter your username for your PPPoA connection to identify and verify your account to the ISP.

¾PPP Password: Enter your password for your PPPoA connection.

¾Authentication Method: Choose a method of authentication, AUTO, PAP, CHAP, or

MSCHAP.

¾MTU: The default MTU value is 1480 Bytes. It is not recommended that you change the default value unless required by your ISP. The value should be between 512 and 1500.

¾Dial on demand: If you check this box, the Internet connection can be terminated automatically after a specified inactivity period (Inactivity Timeout) and be re-established when you attempt to access the Internet again. The default value of Inactivity Timeout is 15. The value should be between 1 and 4320.

¾PPP IP extension: If this box is checked, the IP address obtained by the Router will be assigned to the computer, and the NAT and Firewall will be disabled.

¾Use Static IP Address: Check this box to use the static IP address to dial. The default value is disabled.

¾Enable PPP Debug Mode: Check this box to enable the debug mode. The default value is disabled.

24