TP-Link TD-8840 manual Introduction, 1.1Product Overview, 1.2Conventions, 1.3Main Features

TD-8840

ADSL2+ Modem Router User Guide

Chapter 1.Introduction

Thank you for choosing the TD-8840 ADSL2+ Modem Router.

1.1Product Overview

With the excellent circuit design and high quality production, we guarantee the ADSL2+ Modem Router’s high performance, great stability and easy to use.

The TD-8840 uses integrated ADSL2+ transceiver. The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications.

In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL framing (fast and interleaved) and the I.432 ATM Physical Layer.

The TD-8840 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices, and support Auto-MDIX.

The TD-8840 uses not only html (web mode through Ethernet port) but also external utility software to configure the Router. You can download it from our website (http://www.tp-link.com).

1.2Conventions

The Router or TD-8840, or device mentioned in this User guide stands for TD-8840 ADSL2+ Modem Router without any explanations.

Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation.

You can set the parameters according to your demand.

)Note:

The two devices of TD-8840 and TD-8840B are sharing this User Guide. For simplicity, we will take TD-8840 for example throughout this Guide.

1.3Main Features

¾High speed and asymmetry data transmit mode, built-in 4-port switch realize multi-user to share wide-band internet access

¾Supports All ADSL2+ industrial standards

¾Compatible with all mainstream DSLAM (CO)

¾Firmware upgradeable

¾Provides integrated access of internet and route function which face to SOHO user

2