TP-Link TD-8840 manual ADSL2+ Modem Router User Guide, Static Route

TD-8840

ADSL2+ Modem Router User Guide

Figure 4-32

¾Enable Automatic Assigned Default Gateway - Select this checkbox, and then the Router will accept the first received default gateway assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s). If this checkbox is not selected, you have to enter the static default gateway and/or an interface. Click Save/Apply to save your configurations.

)Note:

If changing the Enable Automatic Assigned Default Gateway from unselected to selected, you must reboot the Router to get the automatic assigned default gateway.

4.3.5.2. Static Route

Choose “Routing→Static Route” menu, you can view and add the Static Route entry in the next screen as shown in Figure 4-33.A static route is a pre-determined path that network information must travel to reach a specific host or network.

Figure 4-33

41