TD-W8950ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
and click the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add, then on the
NAT-Virtual Servers” page, enter use “80” as service port, and your IP address next to the
Server IP Address”, assuming 192.168.1.188 for an example, and remember to click the
Save/Apply button.
) Note:
Because the WEB Server port 80 will interfere with the WEB management port 80 on the modem
router, you will be prompt to change the WEB management port number to avoid interference.
5. The wireless stations cannot connect to the modem router.
1) Make sure the "Enable Wireless" is checked.
2) Make sure that the wireless stations' SSID accord with the modem router's SSID.
3) Make sure the wireless stations have right KEY for encryption when the modem router is
encrypted.
4) If the wireless connection is ready, but you can’t access the modem router, check the IP
Address of your wireless stations.
93