TD-W8950ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
please refer to Note 1. If your ADSL LED is GREEN ON, please check your Internet
configuration. You may need to check this part of information with your ISP and make sure
everything have been input correctly. Refer to 4.2 Device Info for more information.
1.3.2 The Back Panel The modem router's ports, where the cables are connected, and RESET button are located on the
back panel.
Figure 1-2
¾ ADSL: Connect to the Modem Port of Splitter or to the telephone line.
¾ LAN4/WAN, LAN3, LAN2, LAN1: Through these ports, you can connect the modem router to
your PC or the other Ethernet network devices. Enable EWAN function and you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
¾ WiFi: The switch for the WiFi function.
¾ RESET: There are two ways to reset the modem router's factory defaults.
1) Use the Restore Default function on Management -> settings -> Restore Default page in
the router's Web-based Utility.
5