TP-Link TL-PA4010P instruction

TL-PA4010P

AV500 Powerline Adapter With AC Pass Through

Rev: 1.0.0 1910010757

Image 1

TP-Link manual TL-PA4010P AV500 Powerline Adapter With AC Pass Through

Contents

TL-PA4010P AV500 Powerline Adapter With AC Pass Through Copyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Declaration of Conformity Contents Conventions Package Contents Introduction Important Safety InstructionsSystem Requirement Status Indication LED Indicator Description Physical Interface TL-PA4010PAV500 Powerline Adapter With AC Pass Through Introduction Connecting MechanismConnection Instruction Hardware Connection Computer  Note Hardware Connection Internet Installing Management Utility TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through Status Using the Management Utility Set Local Device’s Network Name Network Rename the Remote Device/Enter Password Add Device System Advanced Upgrade Firmware Reset Device To upgrade the devices firmware, follow these instructionsSet All Devices’ Network Name Set Up a Secured Powerline AV Network with the Pair Button Advanced Feature How to Use the Pair ButtonsCreate a secured Powerline network using the Pair button： Pair Secure with 128 bits-AES Leave an existing secured Powerline AV Network Join an existing secured Powerline AV Network Power LED does not light up. Ans. Check the following Appendix a TroubleshootingPowerline LED does not light up Ethernet LED does not light up. Ans. Check the following