TP-Link TL-PA4010P instruction

TL-PA4010PAV500 Powerline Adapter With AC Pass Through

Note:

1.If you press the pair button for more than 10 seconds, the powerline adapter will leave the network which it has joined and its new network name assumes a random value. The Power LED turns off temporarily when it disconnects from the powerline network.

2.For detailed information about the pair button, please refer to Chapter 5 Advanced Feature: How to Use the Pair Buttons.

5

Image 11

TP-Link manual TL-PA4010PAV500 Powerline Adapter With AC Pass Through

Contents

TL-PA4010P AV500 Powerline Adapter With AC Pass Through Copyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Declaration of Conformity Contents Conventions Package Contents System Requirement Important Safety InstructionsIntroduction Status Indication LED Indicator Description Physical Interface TL-PA4010PAV500 Powerline Adapter With AC Pass Through Connection Instruction Connecting MechanismIntroduction Hardware Connection Computer  Note Hardware Connection Internet Installing Management Utility TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through Status Using the Management Utility Set Local Device’s Network Name Network Rename the Remote Device/Enter Password Add Device System Advanced Upgrade Firmware Set All Devices’ Network Name To upgrade the devices firmware, follow these instructionsReset Device Pair Secure with 128 bits-AES Advanced Feature How to Use the Pair ButtonsSet Up a Secured Powerline AV Network with the Pair Button Create a secured Powerline network using the Pair button： Leave an existing secured Powerline AV Network Join an existing secured Powerline AV Network Ethernet LED does not light up. Ans. Check the following Appendix a TroubleshootingPower LED does not light up. Ans. Check the following Powerline LED does not light up