Manuals / TP-Link / Computer Equipment / Network Card

TP-Link TL-PA4010P manual Hardware Connection - Computer,  Note

Models: TL-PA4010P

1 28

Download 28 pages 1.4 Kb

Page 13

2.3 Hardware Connection – Computer

TL-PA4010PAV500 Powerline Adapter With AC Pass Through

2.3 Hardware Connection – Computer

For those computers you wish to be networked by Powerline Adapter, each of the computers must be properly connected with a Powerline Adapter through an Ethernet (RJ-45) cable.

Following are the steps to properly connect the Powerline Adapter to your computer:

1．Connect one end of the provided Ethernet (RJ-45) cable to the Powerline Adapter’s Ethernet port.

2．Connect the other end of the Ethernet (RJ-45) cable to you computer’s LAN port.

3．Plug the Powerline Adapter into a wall socket next to the computer.

4．Turn on your computer.

5．Check and confirm that the Power LED and Ethernet LED on the Powerline Adapter are ON. The hardware connection mechanism is shown below:

Note:

Do not connect the Powerline adapter to any extension lead, power strip, extension cord or surge protector, as these may degrade the network performance.

7

Image 13

TP-Link manual Hardware Connection - Computer, TL-PA4010P AV500 Powerline Adapter With AC Pass Through,  Note

Contents

Rev 1.0.0 TL-PA4010P AV500 Powerline Adapter With AC Pass ThroughCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTThis product can be used in the following countries Safety InformationProduct Description AV500 Powerline Adapter With AC Pass Through DECLARATION OF CONFORMITYRd, Nanshan, Shenzhen, China EN EN EN 61000-3-22006+A12009+A22009 EN ENPackage Contents CONTENTSChapter 4 Using the Management Utility Appendix A TroubleshootingConventions Package ContentsTL-PA4010P AV500 Powerline Adapter With AC Pass Through  Note1.2 Important Safety Instructions Chapter 1 IntroductionTL-PA4010P AV500 Powerline Adapter With AC Pass Through 1.1 System RequirementTL-PA4010P AV500 Powerline Adapter With AC Pass Through 1.3 LED IndicatorStatus IndicationTL-PA4010P AV500 Powerline Adapter With AC Pass Through Power Plug1.4 Physical Interface Integrated Electrical Socket1. If you press the pair button for more than 10 seconds, the powerline adapter will leave the network which it has joined and its new network name assumes a random value. The Power LED turns off temporarily when it disconnects from the powerline network TL-PA4010P AV500 Powerline Adapter With AC Pass Through Note TL-PA4010P AV500 Powerline Adapter With AC Pass Through Chapter 2 Connecting Mechanism2.1 Introduction 2.2 Connection Instruction2.3 Hardware Connection - Computer TL-PA4010P AV500 Powerline Adapter With AC Pass Through Note 2.4 Hardware Connection - Internet TL-PA4010P AV500 Powerline Adapter With AC Pass Through Note TL-PA4010P AV500 Powerline Adapter With AC Pass Through Chapter 3 Installing Management Utility Note TL-PA4010P AV500 Powerline Adapter With AC Pass Through TL-PA4010P AV500 Powerline Adapter With AC Pass Through TL-PA4010P AV500 Powerline Adapter With AC Pass Through TL-PA4010P AV500 Powerline Adapter With AC Pass Through Chapter 4 Using the Management Utility4.1 Status 4.2 Network TL-PA4010P AV500 Powerline Adapter With AC Pass Through4.1.1 Set Local Device’s Network Name 4.2.1 Rename the Remote Device/Enter Password TL-PA4010P AV500 Powerline Adapter With AC Pass ThroughPassword is unnecessary to enter for renaming TL-PA4010P AV500 Powerline Adapter With AC Pass Through Note 4.2.2 Add Device4.3 Advanced TL-PA4010P AV500 Powerline Adapter With AC Pass Through4.4 System 4.4.1 Upgrade Firmware TL-PA4010P AV500 Powerline Adapter With AC Pass ThroughTo upgrade the devices firmware, follow these instructions TL-PA4010P AV500 Powerline Adapter With AC Pass Through4.4.2 Reset Device  Note5.2 Set Up a Secured Powerline AV Network with the Pair Button Chapter 5 Advanced Feature How to Use the Pair ButtonsTL-PA4010P AV500 Powerline Adapter With AC Pass Through Create a secured Powerline network using the Pair button：Join an existing secured Powerline AV Network TL-PA4010P AV500 Powerline Adapter With AC Pass ThroughLeave an existing secured Powerline AV Network  NoteTL-PA4010P AV500 Powerline Adapter With AC Pass Through Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 3. The Powerline LED does not light up