TP-Link TL-PA4020P instruction

TL-PA4020PAV500 2-port Powerline Adapter with AC Pass Through

)Note:

1.If the pair button is pressed till all the LEDs turn off (at least 7 seconds), the powerline adapter will leave the network which it has joined and its new network name assumes a random value. The Power LED turns off temporarily when it disconnects from the powerline network.

2.For detailed information about the pair button, please refer to Chapter 5 Advanced Feature: How to Use the Pair Buttons.

Page 11

Image 11

Contents

REV1.0.0 1910010946 Copyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Declaration of Conformity Contents Conventions Package Contents System Requirement Important Safety InstructionsIntroduction Status Indication LED Indicator Interface Description Physical InterfacePage Connection Instruction Connecting MechanismIntroduction Hardware Connection Computer Hardware Connection Internet Installing Management Utility Page Page Page Status Using the Management Utility Set Local Device’s Network Name Network Rename the Remote Device/Enter Password Add Device System Advanced Upgrade Firmware Set All Devices’ Network Name To upgrade the devices firmware, follow these instructionsReset Device Pair Secure with 128 bits-AES Advanced Feature How to Use the Pair ButtonsSet Up a Secured Powerline AV Network with the Pair Button Create a secured Powerline network using the Pair button： Leave an existing secured Powerline AV Network Join an existing secured Powerline AV Network Ethernet LED does not light up. Ans. Check the following Appendix a TroubleshootingPower LED does not light up. Ans. Check the following Powerline LED does not light up

TP-Link TL-PA4020P manual

Models: TL-PA4020P