TL-PA6010 AV600 Gigabit Powerline Adapter
zNVM:
zPIB: Parameter Information Block. It contains configuration values that establish device network identity, general capabilities and operational modes.
If you want to upgrade the version of firmware for the device, please select appropriate Firmware and PIB files together. New firmware versions and PIB files are posted at
)Note:
The parameter information of PIB will restore to the factory defaults after resetting the PLC.
To upgrade the device's firmware, follow these instructions:
1.Download PIB file and firmware upgrade file from the
2.Enter the path name or click 
to select the downloaded files on the computer into the corresponding blanks.
3.Click the OK button.
)Note:
Do not turn off the device while the firmware is being upgraded. The device will reboot after the Upgrading has been finished.
4.4.2 Reset Device
This Management Utility allows you to reset the Powerline Adapter to its default settings.
zReset Local Device: Click this button to reset the settings of the local Powerline Adapter device only.
zReset All Devices: Click this button to reset the settings of all devices that appear on the Network configuration homepage whose Device’s Password had been entered for the same logical network.
4.4.3Set All Devices’ Network Name
The Set All Devices’ Network Name function allows you to change the logical network of all devices that appear on the Network configuration homepage whose Device’s Password had been entered for
19
