need modify the MTU. This should not be done unless you are sure it is necessary for your
ISP
¾Max Idle Time - If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. (This setting is available just for “Connect on demand” and “Connect Manually”)
¾Connect on demand - You can configure the router to disconnect your Internet connection after a specified period of the Internet connectivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically
¾Connect Automatically - Connect automatically after the router is disconnected
¾Connect Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the router will disconnect your Internet connection, and not be able to
You can configure the MAC address of the WAN port on this page, Figure
Figure
Some ISPs require that you register the MAC address of your adapter, which is connected to your cable, DSL modem or Ethernet during installation. You do not generally need to change anything here.
19