Figure
To add static routing entries:
1. Enter the following data:
¾Destination IP Address - The Destination IP Address is the address of the network or host that you want to assign to a static route
¾Subnet Mask - The Subnet Mask determines which portion of an IP address is the network portion, and which portion is the host portion
¾Gateway - This is the IP address of the gateway device that allows for contact between the router and the network or host
2.Click the Enable checkbox.
3.Repeat steps
4.If you are finished. Click the Save button to save it.
To modify an existing entry:
1.Modify the entry’s Destination IP Address, Subnet Mask and Gateway.
2.Click the Save button.
To delete an existing entry:
1.Select the entry as you desire and make all of its fields blank.
2.Click the Save button.
To delete all the entries:
1.Click the Clear All button.
2.Click the Save button.
38