TP-Link TL-R402M 4.7.2 IP Address Filtering

TL-R402MCable/DSL Router User Guide

Figure 4-20 Firewall Settings

¾Enable Firewall - The general firewall switch is on or off

¾Enable IP Address Filtering - Set IP Address Filtering is enabled or disabled. There are two default filtering rules of IP Address Filtering, either Allow or Deny passing through the router

¾Enable Domain Filtering - Set Domain Filtering as enabled or disabled

¾Enable MAC Filtering - Set MAC Address Filtering is enabled or disabled. You can select the default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router

4.7.2 IP Address Filtering

The IP Address Filtering feature allows you to control Internet Access by specific users on your LAN based on their IP addresses. The IP Address Filtering is set on this page, Figure 4-21:

30