TL-R402MCable/DSL Router User Guide

Figure 4-11 DHCP Settings

¾DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer

¾Start IP Address - This field specifies the first of the addresses in the IP address pool. 192.168.1.100 is the default start address

¾End IP Address - This field specifies the last of the addresses in the IP address pool. 192.168.1.199 is the default end address

¾Address Lease Time - The Address Lease Time is the amount of time a network user will be allowed connection to the router with their current dynamic IP address. Enter the amount of time, in minutes, which the user will be "leased" this dynamic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes

¾Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the router, default value is 192.168.1.1

¾Default Domain - (Optional.) Input the domain name of your network

¾Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your

ISP

¾Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers

)Note:

To use the DHCP server function of the router, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode. This function will take effect until the router reboots.

4.5.2 DHCP Clients List

This page shows Client Name, MAC Address, Assigned IP and Lease Time for each DHCP

21