Manuals / TP-Link / Household Appliance / Home Security System

TP-Link TL-SC2020N manual Re-typePassword: Re-typethe password to confirm

Models: TL-SC2020N

1 53

Download 53 pages 8.23 Kb

Page 28

Manual background

IP Address: The IP address obtained at the PPPoE connecting with network.

User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64 characters.

Password: Enter the password for authentication necessary for PPPoE connections. Type it up to 32 characters.

Re-type Password: Re-type the password to confirm.

Obtain DNS server address automatically: Select this to obtain the address of DNS server automatically.

Use the following DNS server address: Select this when you set the fixed address as the IP address of DNS server.

Primary DNS server: Enter the IP address of the primary DNS server.

Secondary DNS server: Enter the IP address of the secondary DNS server.

Note:

1)PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating Point-to-Point Protocol frames inside Ethernet frames. PPPoE connection is used mainly with ADSL service where individual users connect to the ADSL transceiver (modem) over Ethernet

20

Image 28

TP-Link TL-SC2020N manual Re-typePassword: Re-typethe password to confirm

Contents

TL-SC2020N Wireless N Network Camera Rev: 1.0.0COPYRIGHT & TRADEMARKS FCC STATEMENT FCC RF Radiation Exposure StatementCE Mark Warning National RestrictionsCountry RestrictionIndustry Canada Statement Korea Warning StatementsNCC Notice 당해 무선설비는 운용중 전파혼신 가능성이 있음DECLARATION OF CONFORMITY TP-LINKTECHNOLOGIES CO., LTDShennan Rd, Nanshan, Shenzhen, China TP-LINKTECHNOLOGIES CO., LTDPackage Contents Chapter 1 Safety InstructionsChapter 3 Using Camera via Web Browser Chapter 5 Configuration of Main Menuaccess Internet C. System Requirement – Help to setup SystemAppendix Europe – EU Declaration of ConformityPackage Contents NoteChapter 1 Safety Instructions 2.1 System Requirement 2.2 Product FeaturesNote 2.3 Physical Overview 2.3.1 Front ViewPower Jack LAN Port WPS LED Indicator 2.3.2 Rear ViewRESET Button WPS Button Base Plate 2.4 Mount the Camera 2.5 Hardware Connection2.4.1 The Screw Size 2.4.2 Wall and Ceiling Mount2.5.1 Wired Connection 2.5.2 Wireless Connection by WPSChapter 3 Using Camera via Web Browser 3.1 Obtain the IP AddressFigure Figure3.2 Windows Web Browser NotePage 4.2 Using Camera via iPhone Chapter 4 Operating Camera via Mobile Phone4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming ViewingNote Chapter 5 Configuration of Main Menu 5.1 HomeSymbols Pause Stop5.1.2 Snapshot 5.1.4Audio buttonsSymbols Symbols5.2 Information 5.3 Basic setup5.3.1 Account Add: Click this button to add a new account 1.Click the Add button5.3.2Network 5.3.2.1 TCP/IP5.3.2.2 PPPoE Re-typePassword: Re-typethe password to confirm 5.3.2.3DDNS Dynamic DNS Periodical UpdatePage 4. Type domain in the Hostname field and select sub-domain 5.3.2.4 UPnP Universal Plug and Play 5.3.2.5 Wireless NoteStatus of Wireless Networks Page Subnet mask: Enter the subnet mask 5.3.2.6WPS I.PBC Push Button Configuration methodII.PIN method 5.3.3 Image Setting White Balance5.3.4 Video 5.3.5 Audio5.3.7 Events 5.3.6 Camera setting5.3.7.7 Motion detection 5.3.7.8 e-MailSMTP Select On when you use the e-MailSMTP function. The common setting options are displayed below. Select Off, if you do not wish to use the e-MailSMTP function 5.3.7.9 FTP User Name: Type the user name for the FTP server 5.4System 5.4.1 Initialize5.4.2 Date Time 5.5 Language Appendix C. System Requirement – Help to setup System Europe – EU Declaration of Conformity Clause EN 60950-1:2001 EN 50392:EN 300 328 V1.6.1 DescriptionEspañol Spanish Ελληνική Greek Français French Svenska Swedish FCC Caution IMPORTANT NOTE FCC Radiation Exposure Statement