Samsung DVD-R4000EU Sound No sound, Low volume, Distorted sound, Cannot hear the desired, Differ

Models: DVD-R4000EU

1 64
Download 64 pages 60.91 Kb
Page 53
Image 53

Sound

 

Page

 

 

 

 

 

No sound.

Check the connections. Check the input mode on the amplifier if you have connected one.

5,

 

Low volume.

 

41–43

 

Distorted sound.

Turn V.S.S. off if it causes distortion.

37

 

Cannot hear the desired

Press [AUDIO] to select the desired audio type.

23

 

audio type.

 

 

 

 

 

 

 

Cannot switch audio during

You have used digital connection. Set “Dolby Digital” to “PCM” or connect to other equip-

42, 47

 

stereo or SAP broadcasts.

ment using audio cables (analog connection).

 

 

You cannot change the audio type when a DVD-R is in the disc tray.

 

Play

 

 

 

 

 

 

 

Play fails to start even when

Insert the disc correctly with the label facing up.

15

 

[1] (PLAY) is pressed.

This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, CD and

11

 

Play starts but then stops

MP3 discs.

 

 

immediately.

The disc is dirty. Clean it.

50

 

 

The disc may be badly scratched.

 

 

You inserted a blank DVD-RAM or DVD-R.

 

 

Condensation has formed: Wait 1 to 2 hours for it to evaporate.

 

 

 

 

 

A title or chapter doesn’t play

Some titles and chapters on DVD-Video are not played when you have changed the ratings

46

 

when it is selected.

level.

 

 

Picture distorted during

Some distortion is normal.

 

search.

 

 

 

 

 

 

 

Alternative soundtrack and

The languages are not recorded on the disc.

 

subtitles cannot be selected.

You may have to use the disc’s menus to select languages.

17

 

No subtitles.

Subtitles are not recorded on the disc.

 

 

Turn the subtitles on.

36

 

 

 

 

 

Angle cannot be changed.

This function depends on software availability. Angles can only be changed during scenes

 

 

where different angles are recorded.

 

 

 

 

 

 

You have forgotten your

Return the ratings setting to “8”.

 

ratings password.

While the disc tray is open, press and hold [:/6] and [5/9] on the main unit at the

47

Reference

The display is dim.

Go to the Display menu and change the display’s brightness with “FL Display”.

 

same time for 5 or more seconds.

 

 

Displays

 

 

 

 

 

 

 

“12:00” is flashing on the

The clock is not set.

49

 

unit’s display.

 

 

 

 

 

 

 

The displayed recording time

Displayed recording time is based on the number of frames per second. This number is

 

and actual recording time

subject to minute variations. When recording over long periods, these variations may result

 

 

differ.

in the difference between displayed recording time and actual recording time. This is nor-

 

 

 

mal.

 

 

 

 

 

 

The display doesn’t show the

Times may not appear correctly when searching through tracks recorded with a variable bit

 

correct time. [MP3]

rate.

 

 

 

 

 

 

Remote control

 

 

 

 

 

 

 

The remote control doesn’t

[DVD, TV] is not switched to “DVD”. Switch to “DVD” when operating this unit.

12

 

work.

The remote control and main unit are using different codes. Change the code on the remote

45

 

 

control or main unit.

6

 

 

The batteries are depleted. Replace them with new ones.

 

 

Point the remote control at the remote control sensor on the main unit.

6

 

 

Remove obstacles from between the remote control and main unit.

 

Cannot operate the

Change manufacturer code. Some televisions cannot be operated even if you change the

10

 

television.

code.

12

 

 

[DVD, TV] is not switched to “TV”. Switch to “TV” when selecting the receiving channel for

 

 

the television.

 

 

 

 

 

 

53

DVD-R4000

Page 53
Image 53
Samsung DVD-R4000EU Sound No sound, Low volume, Distorted sound, Cannot hear the desired, Stereo or SAP broadcasts, Differ