Samsung DVD-R4000EU Set up to match your television, Press 3, 4 to select TV Screen and press

STEP 5 Set up to match your television

Setting up

10

Numbered buttons

3, 4, 2, 1

ENTER

Change the settings if your television is:

≥Widescreen (16:9 aspect ratio)

≥Progressive

– Read your television’s operating instructions for details.

1 Press [SETUP] to show the menus.

SETUP	Antenna System	CATV
	Auto Channel Setting
Channel	Channel Caption
	Preset Channel Caption
Set Up
	Manual Channel Caption
Disc
Video	VCR PlusiCH Setting
Audio
Display	TAB SELECT
TV Screen	RETURN

2 Press [3, 4] to select “TV Screen” and press [1].

SETUP	TV Type		4:3 (480I)
	TV mode(4:3)
Channel	4:3 TV Settings for DVD-Video		Pan&Scan
	4:3 TV Settings for DVD-RAM		Letterbox
Set Up
Disc
Video
Audio
Display	SELECT	TAB
TV Screen	ENTER	RETURN

3 Press [3, 4] to select “TV Type” and press [ENTER].

SETUP	TV Type
	Aspect 4:3 & 480I
Channel	Aspect 4:3 & 480P
Set Up	Aspect 16:9 & 480I
Disc	Aspect 16:9 & 480P
Video

4 Press [3, 4] to select the item and press [ENTER].

≥If you select a progressive output (480P) item, select Video in the on-screen menu and set “Transfer” to suit the material (➜ page 38).

To return to the previous screen

Press [RETURN].

When you are finished

Press [SETUP].

∫Regarding Progressive Television Picture

Progressive image aspect (height to width ratio) is set at a stan- dard 16:9. DVD-Video which has been set at 16:9 will be displayed correctly. However, 4:3 video material will be stretched to the right and left when displayed.

≥To view the picture at the right aspect

–For televisions that allow the aspect of progressive images to be adjusted, use the function provided on the television and adjust as necessary.

–For televisions which do not allow the aspect of progressive images to be adjusted, please set “Progressive” to “OFF” (➜ page 38).

[Note]

≥If the unit is connected to the TV through VIDEO OUT or S-VIDEO OUT, output will be interlace only (even if you select progressive output).

≥When progressive output is on, closed captions can not be dis- played.

Television operation

You can control televisions by entering the remote control code.

Press and hold [Í, POWER TV] and enter the two-digit code with the numbered buttons.

e.g., 01: press [0] ➜ [1].

Code No. and Manufacturer

01	Panasonic/National QUASAR	11	JVC
02		12	HITACHI
03	MAGNAVOX SYLVANIA PHIL-	13	MITSUBISHI
	IPS (RC-5)
04	ZENITH	14	SAMSUNG
05	THOMSON RCA GE	15
		16
06	SHARP		GOLDSTAR/LG
07		17
08	SONY	18	SAMSUNG
09	TOSHIBA	19
10	SANYO FISHER		–

≥Test by turning on the television and changing channels. Repeat the procedure until you find the code that allows correct opera- tion.

[Note]

If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote con- trol is not compatible with your television.

∫Operation

Point the remote control at the television.

Operation	Button
On and off	[Í, POWER TV]
Video input mode	[TV/VIDEO]
	(Switch [DVD, TV] to “TV”.)
Channels	[W, X, CH] or
	Numbered buttons
	e.g., Channel “5”: [0] ➜ [5]
Volume	[r, s, VOLUME]

DVD-R4000