Samsung DVD-R4000EU manual Remote control, Batteries, Use, Do not

Setting up

6

STEP 2 The remote control

Batteries

R6/LR6, AA, UM-3

-

+ + -

≥Insert so the poles (i and j) match those in the remote control.

≥Do not use rechargeable type batteries.

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

[Note]

If you cannot operate the unit or television using the remote control after changing the batteries, please re-enter the codes (television➜ page 10, main unit ➜ page 45).

Use

Remote control signal sensor

	20x
30x	20x
	30x

7 m (23 feet) directly in front of the unit

STEP 3 Plug-in Auto Tuning

Numbered

buttons

3, 4, 2, 1

ENTER

POWER, Í/I

V,WCH

After plugging the unit into your household AC outlet and pressing [Í, DVD POWER] to turn the unit on for the first time, the unit assists you to set the menu language, and automatically tunes in all the channels it can receive and sets the clock.

The unit automatically determines the type of transmission (VHF/ UHF or cable) and puts them into channels as follows.

	Band	Channel
TV Mode	VHF	2s13
(VHF/UHF)	UHF	14s69
	VHF	2s13
	CATV LOW BAND	95s99
CATV Mode	CATV MID/SUPER BAND	14s36
	CATV HYPER BAND	37s65
(Cable)
	ULTRA BAND	66s94
		100s125
	SPECIAL CATV CHANNEL	1

DVD-R4000