1.4Panel Layout
1.4.1The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs and the QSS button are located on the front panel (View from left to right).
| Name |
| Status |
| Indication |
| （Power） |
| Off |
| Power is off. |
|
| On |
| Power is on. | |
|
|
|
| ||
| (System) |
| Flashing | The Router is working properly. | |
|
| On /Off |
| The Router has a system error. | |
|
|
|
| ||
| (WLAN) |
| Off | The Wireless function is disabled. | |
|
| Flashing |
| The Wireless function is enabled. | |
|
|
|
| ||
|
|
| Off | There is no device linked to the corresponding port. | |
| (WAN), |
| On |
| There is a device linked to the corresponding port but |
| (LAN |
|
| there is no activity. | |
|
|
|
| ||
|
|
| Flashing | There is an active device linked to the corresponding port. | |
|
|
| Slow Flash |
| A wireless device is connecting to the network by QSS |
|
|
|
| function. This process will last in the first 2 minutes. | |
|
|
|
|
| |
| (QSS) |
| On |
| A wireless device has been successfully added to the |
|
|
| network by QSS function. | ||
|
|
|
|
| |
|
|
| Quick Flash |
| A wireless device failed to be added to the network by |
|
|
|
| QSS function. | |
|
|
|
|
| |
|
|
| Table | ||
