TP-Link TL-WR741ND manual Network, 1 WAN

TL-WR740N/TL-WR741ND150Mbps Wireless N Router

4.5Network

Figure 4-4 the Network menu

There are three submenus under the Network menu (shown in Figure 4-4): WAN, LAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function.

4.5.1WAN

Choose menu “Network→WAN”, and then you can configure the IP parameters of the WAN on the screen below.

1.If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will automatically get IP parameters from your ISP. You can see the page as follows (Figure

4-5):

Figure 4-5 WAN - Dynamic IP

This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP

-25-