TL-WR740N/TL-WR741ND 150Mbps Wireless N Router
parameters from your ISP. Click the Release button to release the IP parameters.
¾MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP.
¾Use These DNS Servers - If your ISP gives you one or two DNS addresses, select Use These DNS Servers and enter the primary and secondary addresses into the correct fields. Otherwise, the DNS servers will be assigned dynamically from your ISP.
)Note:
If you find error when you go to a Web site after entering the DNS addresses, it is likely that your DNS servers are set up improperly. You should contact your ISP to get DNS server addresses.
¾Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast applications. If you cannot get the IP Address normally, you can choose this option. (It is rarely required.)
2.If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Static IP. The Static IP settings page will appear as shown in Figure
Figure 4-6 WAN - Static IP
¾IP Address - Enter the IP address in
¾Subnet Mask - Enter the subnet Mask provided by your ISP in
¾Default Gateway - (Optional) Enter the gateway IP address provided by your ISP in
