TP-Link TL-WR743ND - page 29

TL-WR743ND 150Mbps Wireless AP/Client Router
- 20 -
The Router provides Auto-Detect function and supports three popular ways Dynamic IP,
PPPoE and Static IP to connect to the Internet. It’s recommended that you make use of the
Auto-Detect function. If you are sure of what kind of connection type your ISP provides, you
can select the very type and click Next to continue configuring.
2. If you select Auto-Detect, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the WAN port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
1) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-16. MAC Clone is necessary for most users using Cable Modem. It's highly
recommended to do this on the MAIN COMPUTER that was originally connected to your
Cable Modem.
Figure 3-16 MAC Clone
2) If the connection type detected is PPPoE, the next screen will appear as shown in Figure
3-17.
Figure 3-17 Quick Setup - PPPoE
3) If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-18.