TL-WR743ND 150Mbps Wireless AP/Client Router
- 64 -
MAC Address of Remote AP (BSSID) - The BSSID of the AP your Router is going to
connect to as a client. You can also use the search function to select the BSSID to join.
Survey - Click this button, you can survey the AP which runs in the current channel.
Key type - This option should be chosen according to the AP's security configuration. It
is recommended that the security type is the same as your AP's security type.
Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).
It indicates the authorization type of the Root AP.
WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP
(HEX). It indicates the index of the WEP key.
Password - If the AP your Router is going to connect needs password, you need to fill
the password in this blank.
Be sure to click the Save button to save your settings on this page.
Note:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
Near the center of the area in which your wireless stations will operate.
In an elevated location such as a high shelf.
Away from the potential sources of interference, such as PCs, microwaves, and cordless
phones.
With the Antenna in the upright position.
Away from large metal surfaces.
2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.
4.7.1.3 Wireless Settings in Repeater Mode
If you select Repeater mode in Figure 3-6 or Repeater mode in Figure 4-5, the Wireless Settings
page will display as Figure 4-21.