TL-WR743ND 150Mbps Wireless AP/Client Router
- 70 -
Disable Security - If you do not want to use wireless security, check this radio button. But it’s
strongly recommended to choose one of the following modes to enable security.
WPA/WPA2 - Personal(Recommended) - It’s the WPA/WPA2 authentication type based
on pre-shared passphrase.
Versio n - you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic (Recommended), which can select WPA-Personal
(Pre-shared key of WPA) or WPA2- Personal (Pre-shared key of WPA) automatically
based on the wireless station's capability and request.
Encryption - You can select Automatic (Recommended), TKIP or AES as Encryption.
Note:
If you check the WPA /WPA2 - Personal (Recommended) radio button and choose TKIP
encryption then click save, and you will find a notice in red as shown in Figure 4-25.
Figure 4-25
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA /WPA2 – Enterprise - It’s based on Radius Server.
Versio n - you can choose the version of the WPA security from the pull-down list. The
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select Automatic, TKIP or AES.
Note:
If you check the WPA/WPA2 – Enterprise radio button and choose TKIP encryption, you
will find a notice in red as shown in Figure 4-26.