Transcend Information 25 Safety Precautions, General Use, Backing Up Data, Transporting, Power

Safety Precautions

These usage and safety guidelines are IMPORTANT! Please follow them carefully.

Your StoreJet™ 2.5 is connected to a computer using a Mini USB (on the StoreJet™) to USB A-Type (on a Desktop, Notebook) cable. Please ensure that you connect the cable ends to the ports correctly.

General Use

∙Carefully unpack the contents of the StoreJet™ 2.5 package.

∙ During operation, avoid exposing your StoreJet™ 2.5 to extreme temperatures above 55 , or below 5 .

∙Do not drop your StoreJet™ 2.5.

∙Do not allow your StoreJet™ 2.5 to become damp or wet from water or any other liquids.

∙Do not use a damp/wet cloth to wipe or clean the exterior case.

∙Do not use or store your StoreJet™ 2.5 in any of the listed environments:

oDirect sunlight

oNext to an air conditioner, electric heater or other heat sources o In a closed car that is in direct sunlight

Backing Up Data

∙Transcend does NOT take any responsibility for data loss, or damage during operation. If you decide to store data on your StoreJet™ 2.5 we strongly advise that you regularly backup the data to a computer, or other storage medium.

∙To ensure High-Speed USB 2.0 data transfer rates when using your StoreJet™ 2.5 with a computer, please check that the computer has the relevant USB drivers. If you are unsure about how to check this, please consult the computer or motherboard User’s Manual for USB driver information.

Transporting

∙Do not pack your StoreJet™ 2.5 into luggage without the proper padded support. Other items in the luggage may damage your StoreJet™ 2.5 if it does not have the proper protection.

∙Avoid squeezing your StoreJet™ 2.5 to prevent damage to the internal HDD.

∙Avoid placing objects onto your StoreJet™ 2.5 to prevent damaging it.

Power

∙The StoreJet™ 2.5 is powered directly via a computer USB port; however, the power supplied by the USB port on some older computers is below the required 5V DC power. In this instance, please connect the other USB A-Type connector from the provided USB Y cable to a USB port on the computer, this will provide the additional power necessary to run the drive.

3

Safety