Type mkfs.ext3 /dev/sda1, Linux | Transcend Information 25P instruction

Figure 19: “Erase Disk” confirmation window

Figure 19: “Erase Disk” confirmation window

10.Click the “Close” button to finish and exit.

Linux®

1.Plug the StoreJet 25 Ultra into an available USB port on your Linux computer.

2.Unplug all other USB storage devices from your computer. This is to prevent accidental format of a different USB drive.

3.Type fdisk /dev/sda (replace /dev/sda with your actual USB device)

4.Press p

5.Press n

6.Press w

7.Type mkfs.ext3 /dev/sda1

8.Go to /etc/fstab and add: /dev/sda1 /mnt/usbdrive auto user,noauto 0 0

9.Type mkdir /mnt/usbdrive

10.Type mount /mnt/usbdrive

19

Image 21

Transcend Information 25P Type mkfs.ext3 /dev/sda1, Type mkdir /mnt/usbdrive 10. Type mount /mnt/usbdrive, Linux

Contents

StoreJet 25P User’s Manual Features︱ Package Contents︱Safety Precautions︱ Power The StoreJet 25 package includes the following items StoreJet 25P 1 Mini USB to 2 Standard-A USB cable USB Y cable Quick Start Guide Desktop or notebook computer with a working USB port Power Safety Precautions︱General Use Backing Up Data Reminders Figure 1 StoreJet 25P Case Screw Mini USB Port Installing a Hard Drive Installing a Hard Drive︱ 6. Reattach the case screw 5. Reattach the front cover and slide it back into place Connecting to a Computer︱ Figure 3 Connecting to a ComputerFigure 2 Mini USB to Standard-A USB cable USB Y-cable 3. When the StoreJet 25 is successfully connected to a computer, the StoreJet’s Power LED will Disconnecting from a Computer︱ Figure 7 Drag StoreJet 25 drive icon into the Trashcan Linux Kernel 2.4 or Later Formatting the Hard Drive︱ Figure 10 Format Complete Figure 9 Press “Start” Figure 11 Run as administrator 7. The program will automatically detect the StoreJet 25 driveFigure 12 Allow Transcend’s StoreJet Format Utility to run in Vista 8. Press “Start” Figure 13 The Utility will automatically detect the StoreJet 25 driveFigure 14 Press “Start” 10. Click the “Close” button to finish and exit 8. Click the “Erase” button in the bottom right corner of the window Figure 17 Select a Volume Format file system9. Click “Erase” again to confirm Figure 18 Name your drive optional 7. Type mkfs.ext3 /dev/sda1 9. Type mkdir /mnt/usbdrive 10. Type mount /mnt/usbdriveFigure 19 “Erase Disk” confirmation window Spare USB connector provides additional power Troubleshooting︱The Software CD does not auto-run in Windows My operating system cannot detect the StoreJet The StoreJet 25 does not Power-ON I cannot detect the StoreJet 25 on my MacI cannot detect the StoreJet 25 in Linux Weight with hard drive Specifications︱Power Supply Warranty Transcend Information, Inc Transcend Limited Warranty︱ All logos and marks are trademarks of their respective companies