Setting Up the Photo Frame
1.Attach the Tabletop Stand to the back of the Photo Frame by screwing it clockwise into the Stand Attachment Hole shown above.
2.Once the stand is attached, the Photo Frame may be positioned vertically or horizontally (Landscape or Portrait orientation)
3.Connect the power adapter cable to the DC power input jack on your Photo Frame.
4.Plug the power adapter into a wall outlet.
5.The Photo Frame will automatically turn on. If it is already plugged in, press the power button on the
back of Photo Frame, or press 
on the remote control.
6.To remove the Tabletop Stand, simply twist it
Using a memory card or USB flash drive
1.Insert a memory card or USB flash drive into its appropriate slot on the Photo Frame.
2.Once a memory card or USB flash drive is plugged in, the Photo Frame will automatically begin slideshow playback of all photos available on your memory card or flash drive.
3.The Photo Frame will revert to Photo View mode if you unplug a memory card or USB flash drive while displaying photos. Note: never unplug a memory card or flash drive when files are being transferred to or from the internal memory (My Favorites)
6
