Installation — Continued
Installing an optional Power Module into the ION chassis — continued
4. Position the Power Module at the chassis slot, as shown in Figure 5.
Chassis
Power Module
Mounting Screws
Figure 5: Power Module Installation
5. Side the Power Module completely into the chassis. See Figure 6.
Chassis
Installed Optional 
Power Module
Figure 6: Power Module Installation
Note: Once the optional Power Module is seated to the backplane of the chassis, the fans will become operational.
Installation — Continued
Installing an optional Power Module into the ION chassis — continued
6. Insert the two screws to mount the Power Module to the chassis.
Connecting the Power Module to external power
To connect external power to the
1.Locate the power cord for the Power Module.
2.Make sure that the Power Module ON/OFF switch is in the OFF position. See Figure 7.
3.Plug the female end of the AC power cord into the AC power receptacle on the Power Module. See Figure 7.
4.Plug the male end of the AC power cord into the AC power source.
5.Turn the power ON/OFF switch to the ON position. See Figure 7.
Note: Once the power ON/OFF switch is in the ON position, the power ON LED will lite. This means that the optional Power Module is ready to power the chassis if the primary Power Module fails.
Important: There is NO power sharing between the two Power Modules.
| Power Module |
|
| Power Cord | Power Module |
| Receptacle | ON/OFF Switch |
AC Power Cord | AC Power Cord |
|
(male end) | (female end) |
|
Figure 7: AC Power Cord Ends
8 | Tech Support: | techsupport@transition.com – Click the “Transition Now” link for a live Web chat. | 9 |
