Maintenance
Replacing the Power Module
WARNING: Do not connect the Power Module to the external power source before installing it into the chassis. Failure to observe this caution could result in equipment damage and/or personal injury or death.
To replace the Power Module, do the following:
1.Turn the power ON/OFF switch to the OFF position.
2.Disconnect the AC power cord from the power source.
3.In necessary, remove the chassis grounding assembly. See Figure 8.
Chassis
Frame
Nuts & Washers |
| Grounding Terminal |
(Not Provided) |
| |
| Lug (Not Provided) | |
|
| |
|
|
|
|
|
|
|
|
|
Maintenance — Continued
Installing the Power Module — continued
6.Locate the new Power Module.
7.Push the power ON/OFF switch to the OFF position.
8.Position the Power Module at the chassis slot, as shown in Figure 10.
Chassis
Guide
Figure 8: Chassis Grounding Hardware
4.Remove the two screws securing the Power Module to the chassis.
5.Carefully pull the Power Module from the chassis. See Figure 9.
Mounting Screws
Power Module
Chassis
Mounting Screws | Power Module |
|
Figure 9: Removing Power Module
Figure 10: Power ON/OFF Switch
9. Slide the Power Module complete into the slot.
11.Insert the two screws to secure the Power Module to the chassis.
12.Plug the AC power cord into the AC receptacle on the Power Module.
13.Plug the other end of the cord into an external AC power source.
14.Push the power ON/OFF switch to the ON position. The power ON LED should be lit and the fans will be operational.
10 Tech Support: | techsupport@transition.com – Click the “Transition Now” link for a live Web chat. | 11 |
