Transition Networks CETTF10XX-200 specifications User’s Guide

User’s Guide

CETTF10xx-200

Slide-in-Module Media Converter

•Ethernet

•Copper to Fiber

•10Base-T to 10Base-FL

Transition Networks CETTF10xx-200 series Ethernet 10Base-T to 10Base-FL media converters (designed to be installed in a PointSystem™ chassis) connect 10Base-T twisted-pair copper cable to multimode or single mode 10Base-FL fiber-optic cable.

Part Number	Port One - Copper	Port Two - Fiber-Optic
	10Base-T	10Base-FL
CETTF1011-200	RJ-45	ST, 850 nm multimode
	100 m (328 m)*	2 km (1.2 miles)*
CETTF1012-200	RJ-45	ST, 1310 nm single mode
	100 m (328 m)*	20 km (12.4 miles)*
CETTF1013-200	RJ-45	SC, 850 nm multimode
	100 m (328 m)*	2 km (1.2 miles)*
CETTF1014-200	RJ-45	SC, 1310 nm single mode
	100 m (328 m)*	20 km (12.4 miles)*
CETTF1022-200	RJ-45	ST, 1310 nm single mode
	100 m (328 m)*	40 km (24.9 miles)*
CETTF1027-200	RJ-45	ST, 1300 nm multimode
	100 m (328 m)*	5 km (3.1 miles)*

*Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network installation.

Installation	.2
Operation	.5
Cable Specifications	.7
Technical Specifications	.9
Troubleshooting	10
Contact Us	11
Compliance Information	12