Transition Networks CPSMP-130, CPSMP-140 technical specifications Compliance Information, 33213.B

Models: CPSMP-130 CPSMP-140

1 7
Download 7 pages 63.48 Kb
Page 7
Image 7
Compliance Information

Compliance Information

UL Listed; C-UL Listed (Canada); CE Mark

CISPR22/EN55022 Class A

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

European Regulations

Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Achtung! Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten, in weichen Fällen der Benutzer für entsprechende Gegenmaßnahmen werantwortlich ist.

Attention! Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures spécifiques appropriées.

 

 

Declaration of Conformity

 

 

 

 

Name of Mfg:

Transition Networks

 

 

6475 City West Parkway, Minneapolis MN 55344 USA

Model:Redundant Power Supply

Part Number(s): CPSMP-130, CPSMP-140

Regulation: EMC Directive 89/336/EEC

Purpose: To declare that the CPSMP-130and CPSMP-140to which this declaration refers are in conformity with the following standards.

EN 55022:1988 + A1:2000 Class A; FCC Part 15 subpart B; UL 1950

I, the undersigned, hereby declare that the equipment specified above conforms to the above

Directive(s) and Standard(s).

June 8, 2001

Stephen Anderson, Vice-President of Engineering

Date

Trademark Notice

All trademarks and registered trademarks are the property of their respective owners.

Copyright Restrictions

© 2001, 2004 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks.

Printed in the U.S.A.

33213.B

 

 

Page 7
Image 7
Transition Networks CPSMP-130, CPSMP-140 technical specifications Compliance Information, 33213.B