Hardware Description | Transition Networks MIL-SM808GPXX specification

Hardware Description

2.

Hardware Description

Front Panel

The Front Panel of the MIL-SM808G switch series consists of eight 100Mbps Fast Ethernet Fiber ports, one SFP port, one console port, one LED-Indicator for Power, one LED-Indicator (LNK/ACT) for the SFP port and two LED-Indicators (LNK/ACT, FDX/COL) for each Fiber port.


Console		LED SFP	Fast Ethernet
Port	Indicators Port		Fiber Ports

Figure 2-1. Front Panel for MIL-SM808G

100BASE-FX Fiber Ports: The MIL-SM808G comes with eight SC connectors (multi-mode or single mode) or eight ST connectors (multi-mode).

SFP Port: The MIL-SM808G supports the 3.3V model Gigabit Transceiver for Gigabit SX or LX connector.

Console Port: Console management can be done through the Console Port. It requires a direct connection between the switch and an end station (PC) via a RS-232 cable.

6

Image 12

Transition Networks MIL-SM808GPXX manual Hardware Description, Front Panel

Contents

Intelligent Fiber Switch MIL-SM808GPxx8 Port 100BASE-FX Plus One SFP USER GUIDE Regulatory Approval FCC Class A UL CSA C22.2 No EN60950 CE To Contact MiLAN Technology Table of Contents 4-3-4-2. Create a VLAN Group 5-4-3. Console Port Information 5-4-4. Port Controls 5-4-5. Trunking 1. Introduction Features Intelligent Management Features Package Contents Management MethodsConsole and Telnet Management Web-based Management SNMP Network Management Hardware Description Front Panel LED Indicators Status ColorDescription Desktop Installation Rear PanelPower Plug Power On/Off Switch Attaching Rubber Feet Power On Network Application Segment Application Network Configuration Connecting a Terminal or PC to the Console Port Console - Menu Baud Rate 9600 bps Data Bits Parity none Stop Bits Flow Control None logon screen and a new login is necessary in order to continue 4-1 Main Menu Control Key 4-2. Status and Counters 4-2-1. Port Status Actions 4-2-2. Port Counters Reset All Sets all counters to 4-2-3. System Information Firmware Version Displays the switch’s firmware versionHardware Version Displays the switch’s Hardware version Kernel version Displays Boot PROM version 4-3. Switch Static Configuration 4-3-1. Administration ConfigurationPage 4-3-1-1. Device Information 4-3-1-2. IP Configuration 4-3-1-4. Change Password 4-3-1-3. Change UsernameUse this screen to change the Password. The default password is root 4-3-2. Port / Trunk Configuration Quit Exits the port configuration page and returns to previous menu 4-3-3. Port Mirroring Configuration action menu line Save Saves all configured values 4-3-4. VLAN Configuration 4-3-4-1. VLAN Configure Choose a VLANPort Based VLANs IEEE802.1Q VLANsPage 4-3-4-2. Create a VLAN Group Page 4-3-4-3. Edit / Delete a VLAN Group 4-3-5. Priority Configuration Page 4-3-6.MAC Address Configuration 4-3-6-1.Static MAC Address Add static MAC address 3. In the Port num field, enter the port number for the device Edit static MAC address 1. Press Edit key to modify a static MAC address3. Press the Edit key to modify all the items Delete static MAC address 4-3-6-2.Filtering MAC Address 4-3-7.Misc Configuration 4-3-7-1.Port Security 4-3-7-2.MAC Age Interval 4-3-7-3.Broadcast Storm Filtering Page 4-3-7-4.Max Bridge Transmit Delay Bound Save Saves all configured values 4-4.Protocol Related Configuration 4-4-1.STP 4-4-1-1.STP Enable Page 4-4-1-2.System Configuration Page 4-4-1-3.STP Port Configuration 4-4-2.SNMP Page 4-4-2-1.System Options 1. System Name Enter a name to identify the switch3. System Location Enter the location of the switch 4-4-2-2.Community Strings Save Saves all configured values 4-4-2-3.Trap Managers 4-4-3.GVRP Press the Space key to choose Enabled or Disabled 4-4-4.LACP 4-4-4-1.Aggregator Setting 4-4-4-2.State Activity 4-4-4-3.LACP Status 4-5.Reboot Switch 4-6.Updating Firmware using the Console Port Page Page Web-Based Management Web Management FunctionPage 5-1. Web Management Home Overview 1. Home Page 5-2. Port status 5-4. Administrator 5-3. Port StatisticsPage 5-4-2. Switch Settings 5-4-2-1.Basic 5-4-1. IP AddressPage 5-4-2-2.Advanced 2. Priority Queue Service settings Page 3. Protocol Enable Setting Enable Internet Group Multicast Protocol Enables IGMP protocolEnable Mode Enables the switch to be the IGMP Querier No VLAN Default 4. IGMP Theory of Operation Page GVRP GARP VLAN Registration Protocol 5-4-3. Console Port Information Baud rate bits/sec Data Bits Parity Check none Stop BitsFlow Control none 5-4-4. Port Controls 5-4-5. TrunkingPage 5-4-5-1. Aggregator Setting 5-4-5-2. Aggregator Information 5-4-5-3. State ActivityPage 5-4-6. Filter Database 5-4-6-1. IGMP Snooping 5-4-6-2. Static MAC Address 5-4-6-3. Port Security 5-4-6-4. MAC Filtering 5-4-7. VLAN Configuration 5-4-7-1. Basic Create a VLAN and add tagged member ports to it 5-4-7-2. Port VID Page 5-4-8. Spanning Tree Priority Max AgeHello Time ForwardPage 5-4-9. Port Mirroring 5-4-10. SNMP 3. Trap Manager 5-4-11.Security Manager User Name root Password root 5-4-12. TFTP Update Firmware 5-4-13. Configuration Backup 5-4-13-1. TFTP Restore Configuration 5-4-13-2. TFTP Backup Configuration 5-4-14. Reset System 5-4-15. RebootReset Switch to default configuration Technical Specifications 440mmx 160mmx 44mm L x W x H Safety UL, cUL Troubleshooting Incorrect connections Diagnostic LED Indicators Cabling 90000407Rev. A