5-4-5-1. Aggregator Setting
System Priority: A value used to identify the active LACP. The switch with the lowest value has the highest priority and is selected as the active LACP.
To create a trunk across two or more ports:
1.Group ID: Choose the "Group ID" and click "Get".
2.LACP: If enabled, the group supports LACP. If disabled, the group is a local static trunking group between two switches. All ports support LACP dynamic trunking group. If connecting to another device that also supports LACP, the LACP dynamic trunking group will be created automatically.
3.Work ports: Enter the maximum number of ports that can be aggregated at the same time. If the group is an LACP static trunking group, the exceed ports is standby and able to aggregate if work ports fail. If the group is a local static trunking group, the number must be the same as group ports.
4.Select the ports to join the trunking group. If LACP is enabled, you can configure LACP Active/Passive status for each port.
5.Click Apply to save the new configuration.
85
