Manuals / Transition Networks / Computer Equipment / Switch

Transition Networks MIL-SM808GPXX manual LED Indicators, Status Color, Description

Models: MIL-SM808GPXX

1 117

Download 117 pages 26.98 Kb

Page 13

LED Indicators

LED

LED Indicators

Figure 2-2. LED Indicators

There are two LED-Indicators (LNK/ACT, FDX/COL) for each Fiber port, one LED-Indicator (LNK/ACT) for the SFP port and one LED-Indicator for power. The following table provides descriptions of the LED statuses and meaning. They provide a real-time indication of systematic operation status.

Status Color

Description

	Power		On	Green	Power On

			On	Green	The port is successfully connecting with
					a device.
	LNK /
			Blinks	Green	The port is receiving or transmitting data.

	ACT

			Off		No device attached.

			On	Orange	The port is operating in full-duplex mode
			On	Orange	and device is attached.
	FDX /		Blinks	Orange	Collision of Packets is occurring on the
	COL		Blinks	Orange	Collision of Packets is occurring on the
					port.
			Off		Half-duplex mode or no device attached.

Table 2-1. The description of LED Indicators

7

Image 13

Transition Networks MIL-SM808GPXX manual LED Indicators, Status Color, Description

Contents

MIL-SM808GPxx Intelligent Fiber Switch8 Port 100BASE-FX Plus One SFP USER GUIDERegulatory Approval FCC Class A UL CSA C22.2 No EN60950 CE To Contact MiLAN Technology Table of Contents 4-3-4-2. Create a VLAN Group 5-4-3. Console Port Information 5-4-4. Port Controls 5-4-5. Trunking 1. Introduction Intelligent Management Features FeaturesManagement Methods Package ContentsConsole and Telnet Management Web-based Management SNMP Network Management Front Panel Hardware DescriptionStatus Color LED IndicatorsDescription Rear Panel Desktop InstallationPower Plug Power On/Off Switch Attaching Rubber FeetPower On Segment Application Network ApplicationConnecting a Terminal or PC to the Console Port Network ConfigurationBaud Rate 9600 bps Data Bits Parity none Stop Bits Flow Control None Console - Menulogon screen and a new login is necessary in order to continue Control Key 4-1 Main Menu4-2. Status and Counters Actions 4-2-1. Port StatusReset All Sets all counters to 4-2-2. Port CountersActions Quit Exits the port status page and returns to previous menuFirmware Version Displays the switch’s firmware version 4-2-3. System InformationHardware Version Displays the switch’s Hardware version Kernel version Displays Boot PROM version4-3-1. Administration Configuration 4-3. Switch Static ConfigurationPage Actions 4-3-1-1. Device InformationActions 4-3-1-2. IP Configuration4-3-1-3. Change Username 4-3-1-4. Change PasswordUse this screen to change the Password. The default password is root 4-3-2. Port / Trunk Configuration Save Saves all configured values Quit Exits the port configuration page and returns to previous menuActions Actions 4-3-3. Port Mirroring Configurationaction menu line Save Saves all configured values 4-3-4. VLAN Configuration Choose a VLAN 4-3-4-1. VLAN ConfigurePort Based VLANs IEEE802.1Q VLANsPage Actions 4-3-4-2. Create a VLAN GroupPage 4-3-4-3. Edit / Delete a VLAN Group Actions 4-3-5. Priority ConfigurationPage 4-3-6.MAC Address Configuration 4-3-6-1.Static MAC Address 3. In the Port num field, enter the port number for the device Add static MAC address1. Press Edit key to modify a static MAC address Edit static MAC address3. Press the Edit key to modify all the items Delete static MAC address4-3-6-2.Filtering MAC Address 4-3-7.Misc Configuration 4-3-7-1.Port Security Actions 4-3-7-2.MAC Age IntervalActions 4-3-7-3.Broadcast Storm FilteringPage 4-3-7-4.Max Bridge Transmit Delay Bound Actions Save Saves all configured valuesQuit Exits this page and returns to previous menu 4-4.Protocol Related Configuration 4-4-1.STP 4-4-1-1.STP Enable Page 4-4-1-2.System Configuration Page 4-4-1-3.STP Port Configuration 4-4-2.SNMP Page 1. System Name Enter a name to identify the switch 4-4-2-1.System Options3. System Location Enter the location of the switch Actions 4-4-2-2.Community StringsQuit Exits this page and returns to previous menu Save Saves all configured valuesActions 4-4-2-3.Trap ManagersPress the Space key to choose Enabled or Disabled 4-4-3.GVRPActions Quit Exits this page and returns to previous menu4-4-4.LACP Actions 4-4-4-1.Aggregator SettingActions 4-4-4-2.State ActivityActions 4-4-4-3.LACP StatusQuit Exits this page and returns to previous menu 4-5.Reboot Switch 4-6.Updating Firmware using the Console Port Page Page Web Management Function Web-Based ManagementPage 1. Home Page 5-1. Web Management Home Overview5-2. Port status 5-3. Port Statistics 5-4. AdministratorPage 5-4-1. IP Address 5-4-2. Switch Settings 5-4-2-1.BasicPage 5-4-2-2.Advanced 2. Priority Queue Service settings Page Enable Internet Group Multicast Protocol Enables IGMP protocol 3. Protocol Enable SettingEnable Mode Enables the switch to be the IGMP Querier No VLAN Default4. IGMP Theory of Operation Page GVRP GARP VLAN Registration Protocol Baud rate bits/sec Data Bits Parity Check none Stop Bits 5-4-3. Console Port InformationFlow Control none 5-4-5. Trunking 5-4-4. Port ControlsPage 5-4-5-1. Aggregator Setting 5-4-5-3. State Activity 5-4-5-2. Aggregator InformationPage 5-4-6. Filter Database 5-4-6-1. IGMP Snooping 5-4-6-2. Static MAC Address 5-4-6-3. Port Security 5-4-6-4. MAC Filtering 5-4-7. VLAN Configuration 5-4-7-1. Basic Create a VLAN and add tagged member ports to it 5-4-7-2. Port VID Page 5-4-8. Spanning Tree Priority Delay timeMax Age Hello TimePage 5-4-9. Port Mirroring 5-4-10. SNMP 3. Trap Manager User Name root Password root 5-4-11.Security Manager5-4-13. Configuration Backup 5-4-13-1. TFTP Restore Configuration 5-4-12. TFTP Update Firmware5-4-13-2. TFTP Backup Configuration 5-4-15. Reboot 5-4-14. Reset SystemReset Switch to default configuration 440mmx 160mmx 44mm L x W x H Technical SpecificationsUL, cUL SafetyIncorrect connections TroubleshootingDiagnostic LED Indicators 90000407Rev. A Cabling