Transition Networks MIL-SM808GPXX manual STP Port Configuration

4-4-1-3.STP Port Configuration

1.PortState: Spanning tree status for each port.

2.PathCost: Specifies the path cost of the port that the switch uses to determine which ports are the forwarding ports. If you change the value, you need to restart the switch for valid value change to take effect.

3.Priority: Specifies the path cost of the port that the switch uses to determine which ports are the forwarding ports. The lowest number is

picked as the forwarding port. The range is 1-65535 and the default value is based on IEEE802.1D standard. The values should be in the range:

10Mb/s = 50-600 100Mb/s = 10-60.

If you change the value, you must reboot the switch to save the value change.

51