Operation of Handheld Microphone
A. Battery Installation Steps:
1.Turn off the microphone before inserting batteries.
2.Press in the latch to release the lower housing and slide it off.
3.Press in the latch to release the battery cover and slide it down.
4.Insert 2 disposable batteries of 1.5V type or 2 rechargeable batteries of 1.2V type.
5.Observe proper polarity while inserting batteries.
6.Slide the battery cover back to its original position.
7.Install the lower housing back to the lower part of the microphone.
B. Switch-On Steps:
1. Press the power switch and hold for about two seconds until the LED turns to RED and "on" is displayed in the LCD. 
2.The LCD will then automatically display the selected channel. 
:Channel indicator.
:Press and hold the Up or Down button to display the corresponding frequency
C. Switch Off steps:
1.Press and hold power switch for about two seconds until the LCD displays OFF. 
D. Channel/Frequency Settings (with power on):
1.Press the SET button and hold for about 2 seconds.
2.The Channel number display will start flashing.
3.Press the Up button to display a higher numbered channel.
15
