G. Trouble Shooting:
1.LED doesn't light when power switch is pressed to turn on mic.
a.Make sure that the batteries are not discharged.
b.Make sure that the batteries are installed correctly.
2. LCD shows |
| when power switch is pressed to turn mic off. |
a. Press the SET, UP and DOWN buttons at the same time in order to turn the microphone off automatically. The LCD display will flash about ten times and then the microphone will turn off automatically. The microphone should now turn on and off normally.
b. If the problem persists, call for service.
3.LCD panel shows unusual indications.
a.Remove the batteries from the microphone and
4.No audio from microphone.
a.Check that the frequency of the transmitter is the same as that of the receiver.
b.Make sure that the Mic switch is not set to Mute.
c.Check if the distance between the transmitter and the receiver is too great.
d.Check if the transmitter or the receiver is too close to any large metal objects.
5.Interference and signal Disturbance.
a.Make sure there are no other wireless systems operating on the same frequency in the same area. This includes Microphones, televisions, radio stations, etc. Try setting the transmitter and receiver to a new channel.
H. Q&A
1.Q: How long can the microphone be operated with fully charged batteries?
A:
batteries will last approximately 13 hours.
Q:How much time is required to recharge batteries from a fully exhausted state.?
A:Approximately 4 to 5 hours.
17
