22
CLK
TME
AVG
MAX
TRP
ODO
MH
Mode
Set
SETTINg CuSTOM WhEEl SIzE
The procedure is almost the same as the basic setup on pages
13-14, except instead of picking a wheel size from the menu,
you can program in a 4-digit number.

Selecting the custom value 4-digit number

There are two methods for
selecting the custom wheel size
value:
• Select a value from Table 3,
Custom wheel size codes
• Do a rollout test to measure
the circumference of your wheel
(page 24).

To set the computer

1. Cycle Mode to TME.
2. Hold Set•
Wheel Select icon appears on the screen.
3. Cycle Set• to change your wheel selection from Wheel 1 to Wheel
2.
Setting Custom Wheel Size
Table 3- Custom wheel size codes
00 x 20 2086 26 x .5 200
00 x 23 2096 26 x .90 2045
00 x 25 205 26 x .95 2050
00 x 28 236 26 x 2.0 2055
00 x 32 255 26 x 2. 2068
00 x 35 268 26 x 2.2 205
00 x 38 280 Custom
0000 - 2999