Modem Mode
Mode Screen
This screen is change back to Router mode, if desired.
Broadband ADSL Router User Guide
ADSL Screen
This screen is used to set the ADSL parameter used by the modem.
Figure 55: Mode Screen
Data - Mode Screen
Device Name This field displays the current name of this device.
Device Mode Select the desired device mode for the router:
• Router - Both the ADSL Modem and the Router features are opera- |
tional. In this mode, this device can provide shared Internet Access to |
all your LAN users. Also, by default, it acts a DHCP Server, provid- |
ing an IP address and related information to all LAN users. |
• Modem - Only the ADSL Modem component is operational. All |
Router features are disabled. This device is "transparent" - it does not |
Data - ADSL Screen
Multiplexing Method
VPI
VCI
Figure 56: ADSL Screen
Check with your ISP or DSL service provider to find whether your Multiplexing Method is
Enter the value proposed by your ISP or DSL service provider.
Enter the value proposed by your ISP or DSL service provider.
perform any operations or make any changes to the network traffic |
passing through it. This mode is also called Bridge Mode. |
After changing the mode, this device will restart, which will take a few seconds. The menu will also change, depending on the mode you are in.
Operation
Operation is automatic and transparent.
The modem will act like any other ADSL modem. No routing will be performed, and no client login will be done. If a client login is required, it must be performed by your Router/Gateway or by software on your PC.
77 | 78 |
