![](/images/new-backgrounds/1108838/10883883x1.webp)
Modem Mode
Status Screen
In Modem mode, the Status screen looks like the example below.
Figure 57: Status Screen - Bridge Mode
Data - Status Screen (Bridge Mode)
System
Device Name | The current name of the Router. This name is also the "hostname" |
| for users with an "@Home" type connection. |
|
|
Firmware Version | The version of the current firmware installed. |
|
|
Modem |
|
Modem Status | This indicates the status of the ADSL modem component. |
|
|
DownStream | Displays the speed for the DownStream Connection. |
Connection Speed |
|
|
|
UpStream Connection | If connected, displays the speed for the Up Stream (upload) |
Speed | ADSL Connection. |
|
|
VPI | This displays the current VPI setting used for the ADSL connec- |
| tion. |
|
|
VCI | This displays the current VCI setting used for the ADSL connec- |
| tion. |
LAN |
|
IP Address | The IP Address of the Broadband ADSL Router. |
|
|
Network Mask | The Network Mask (Subnet Mask) for the IP Address above. |
|
|
MAC Address | This shows the MAC Address for the Broadband ADSL Router, |
| as seen on the LAN interface. |
|
|
Broadband ADSL Router User Guide
Buttons
Attached Devices | Clicking this will generate a list of all devices currently using the |
| Access Point. |
|
|
Refresh Screen | Update the data displayed on screen. |
|
|
79 | 80 |