TRENDnet TE100-P1U manual Close Click this button to exit PS-Utility

-Change IP Address: Click this button to bring up the following dialog box, allowing you to change the IP Address.

In this dialog box, you can select either Manually Assign or DHCP Assign Automatically. When completed, click OK.

-Update Firmware: Click this button to update the firmware of the selected print server.

-Show Web Setup: Click this button to open your web browser and launch the Configuration Utility. Alternately, you can double-click the print server in the Device List to launch the Configuration Utility.

-Factory Reset: Click this button to reload the factory settings of the print server.

-Discover Device: Click this button to search the connected print server again.

-About: Click this button to bring up a window containing the basic information of PS-Utility.

-Close: Click this button to exit PS-Utility.

-

3.Information Field: Display the basic information of the selected print server in the Device List.

4.Status Bar: Display the system status.

- 17 -