TRENDnet TEG-S4000I manual LED Indicators, Lk/Act

Models: TEG-S4000I

1 71
Download 71 pages 19.25 Kb
Page 10
Image 10

The 3-pronged power plug and On/off switched are located at the Rear Panel of the Modular Switch displayed in Figure 2-2. The Switch will work with AC in the range 100-240VAC, 50-60Hz.

Figure 2-2.

Rear Pane

LED Indicators

All LED status indicators are located on the FRONT panel of the switch. They provide a real-time indication of system and operational status. The ports for connections to other devices and networks are also on the front panels.

LED

Status

Meaning

Power

Green

Power on

Diag

Red

Alert and problem notice

LK/ACT

Green

Device has been connected to the port

 

 

 

Blinks

The data is transmitting on the port

 

Off

No device attached

FD/COL

Yellow

Port in full duplex mode

 

 

 

Blinks

A collision occurs on the port

 

Off

No device attached or in half duplex mode

100

Green

The Port is in 100Mbps mode

( Only for 8

 

 

port 10/100M

Off

Not connected or in 10 Mbps mode

Switch Module )

Table 2-1. The above table provides descriptions of the LED status and their meaning.

10

Page 10
Image 10
TRENDnet TEG-S4000I manual LED Indicators, Lk/Act