Mounting the Switch
The Modular Switch is suitable for use in an office environment where it can be
Desktop Installation
Set the Switch on a sufficiently large flat space with a power outlet nearby. The surface where you put your Switch should be clean, smooth, level, and sturdy.
Make sure there is enough clearance around the Switch to allow attachment of cables, power cord and air circulation.
Attaching Rubber Feet
A.Make sure mounting surface on the bottom of the Switch is grease and dust free.
B.Remove adhesive backing from your Rubber Feet.
C.Apply the Rubber Feet to each corner on the bottom of the Switch. These footpads can prevent the Switch from shock/vibration.
Figure 4-1. Attaching Rubber Feet to each corner
on the bottom of the Switch
20
