TRENDnet TEW-210APB user manual How to install and launch the SNMP Manager

4.1 How to install and launch the SNMP Manager

There is a CD which enclosed in this product. The SNMP software can be found on this CD. Please install the SNMP Manager on your pc and change the IP address of your pc into 192.168.5.xxx subnet for TEW-210APB configuration. The default IP of TEW-210APB is 192.168.5.100.

To make sure your pc and TEW-210APB whether in a same subnet and the connection is well, you can do a test via “ ping “ command. For example, you can employ the following command “ ping 192.168.5.100 “ to check this connection is ok or not.

After launched the SNMP Manager, Please click the “ Find Access Point ” which under the “ File “ tab for available AP searching. While find the available AP then press the “ connect ” button. Below is a figure for a reference.

After completed the modified setting, please remember to save the result via click the “ Download Changes “ which under the “ File “ tab.

Figure 1

6