Manuals / TRENDnet / Computer Equipment / Network Router

TRENDnet TEW-310APBX manual Introduction, Connections

Models: TEW-310APBX

1 47

Download 47 pages 11.73 Kb

Page 5

2. Introduction

2. Introduction

TEW-310APB Wireless Access Point is an enhanced 802.11b high- performance, wireless access point. It is an ideal way to extend the reach and number of computers connected to your wireless network.

Unlike most 802.11b access points, the TEW-310APB is capable of data transfer speeds up to 22 Mbps (compared to the standard 11 Mbps) when used with other TRENDnet products such as the TEW-301PC PCMCIA CardBus Adapter and TEW-303PI Wireless PCIAdapter.

After completing the steps outlined in the Quick Installation Guide (included in your package) you will have the ability to share information and resources, such as files and printers, and enjoy the freedom that wireless networking delivers.

The TEW-310APB is compatible with most popular operating systems, including Macintosh, Linux and Windows, and can be integrated into a large network. This Manual is designed to help you connect the Access Point and the TRENDnet 2.4GHz Wireless Adapters into a network in Infrastructure mode. Please take a look at the Getting Started section in this manual to see an example of an Infrastructure network using the TEW-310APB.

This manual provides a quick introduction to wireless technology and its application as it relates to networking. Please take a moment to read through this manual and get acquainted with wireless technology.

Connections

Diversity Antenna

Reset Button: Press

this button to reset all configurations back to factory result settings.

Power Adapter Receptor

Ethernet Port (RJ-45):

Supports 10/100Mbps. Use Ethernet cable to connect this port to another ethernet.

Fig. 2.1

4

Image 5

TRENDnet TEW-310APBX manual Introduction, Connections

Contents

Users Guide 2.4 GHz Wireless Access Point + BridgeTEW-310APB TEW-310APBX 1.Package Contents CONTENTS3.Wireless Basics 5.Using the Configuration Utility2 Locate antenna connectors Replacing the antenna with high gain antenna1 Locate the two antennas inside the boxContents 1. Package ContentsSystem Requirements If any of the above items are missing, please contact your resellerConnections 2. IntroductionFeatures and Benefits LED Indicators 3. Wireless Basics Standards - Based Technology TRENDware Wireless Family of LAN products includeInstallation Considerations objects that the wireless signal must pass thru may limit range. Typical ranges vary depending on the types of materials and any background RF radio frequency noise in your home or business. The key to maximizing range is to follow these basic guidelines IP ADDRESS 4. Getting Startedplease remember that the IP Address for each computer must be in Setting Up an Infrastructure Network Configuration Menu 5. Using the Configuration MenuFactory Default Setting for the TEW-310APB Status Screen with Menu Bar AP name SSID Channel WEP Key Mode Basic SettingsSubnet Mask , and Gateway by IP SettingsAutomatically . Or you can AP Mode Advanced SettingsAuthentication Type 802.1X SecurityTools Note Please do not interrupt the firmware upgrade processBased on Windows XP Operating System 6. TroubleshootingGateway Address ∙ Select the Hardware Tab ∙ Click Device Manager ∙ Click PropertiesCardbus Adapter Adapters∙ Right-click on 22M Wireless ∙ Select Properties to check that the drivers are installed properly4. Resetting the TEW-310APB to Factory Default Settings Select Set up a home or small office network Using the Network Setup Wizard in Windows XP7. Networking Basics Microsoft Windows XP Go to Start Control Panel Network ConnectionsClick Next Please follow all the instructions in this windowClick Next Workgroup name Enter a Computer description and a Computer nameClick Next Note Each computer should have a unique Computer name Click NextPlease wait while the wizard applies the changes When the changes are complete, click NextFormat the disk if you wish, and click Next Insert a disk into the Floppy Disk Drive, in this case drive APlease wait while the wizard copies the files Page ∙ Click Properties Naming your ComputerIn Windows XP Checking the IP Address in Windows XP/2000 Go to Start All Programs Accessories Command PromptAddress Type Command and click OKNetwork Connections Assigning a Static IP AddressControl Panel ∙ Right-click on Local Area Connections ∙ Click Properties∙ Highlight Internet Protocol TCP/IP ∙ Click PropertiesYou have completed the assignment of a Static IP Address ∙ Input your DNS server address only if you plan to use the InternetNetwork Connection Connecting to a Wireless Network in Windows XPInternet Protocol TCP/IP click Properties ∙ Select Obtain an IP addressProperties select Internet Protocol TCP/IP click Properties Connecting to a Wireless Network in Windows∙ IP address ∙ Subnet mask Connecting to a Wireless Network with a Wireless Router or an Access Point using a DHCP server in Windows ∙ Go to Start Settings Control Panel Double-click Connecting to a Wireless Network in Windows Me andselect Internet Protocol TCP/IP click Properties ∙ Select Detect connection to network media∙ Select Specify an IP address Checking the Wireless Connection by Pinging∙ IP address ∙ Subnet mask ∙ Select Detect connection to network mediaFile and Printer Sharing For Windows Me andShared Documents folder and Sharing files and folders in the Help and Diagnostic LED 8. Technical SpecificationsStandards PortsWeight DimensionsTemperature HumidityTRENDware Technical Support over the Telephone Tel +1-310-891-1100 9. Contacting Technical SupportTRENDware Technical Support E-mailAddress E-mail support@trendware.com