| There are 3 scan modes (S, F and D mode). Hold the | |
| “Seek” button to toggle between scan modes. After | |
| switching to the desired scan mode, press “Seek” button | |
| again to do a site survey. | |
| [S] Mode: Ranks access points in the order of | |
Scan | signal strength. | |
| ||
mode | [F] Mode: Lists all unecrypted access points | |
| ||
| (access points without security) and ranks each | |
| access piont in signal strength order. | |
| [D] Mode: Locks onto one access point to test its | |
| signal strength at different locations. | |
|
| |
| Indicates security setting of the wireless network. | |
Security | WPA security is enabled | |
WEP security is enabled | ||
| ||
| Wireless security is disabled (no security) | |
|
| |
| Indicates the signal strength and the radio band | |
| (802.11b/g) of wireless network. There are 5 levels of | |
Signal | signal strength. | |
802.11g mode at 2.4 GHz band | ||
| ||
| 802.11b mode at 2.4 GHz band | |
|
|
4
English