TRENDnet User’s Guide

7.Although the phone may not be in use, the base can still transmit wireless signal. Move the phone’s base station as far away as possible from your wireless devices.

8.Make sure that your router is in a good location.

a.For the widest coverage area, install your router near the center of your home, and near the ceiling, if possible.

b.Avoid placing the router on or near metal objects (such as file cabinets and metal furniture), reflective surfaces (such as glass or mirrors), and masonry walls.

c.Any obstruction can weaken the wireless signal (even non-metallic objects), so the fewer obstructions between the router and the wireless device, the better.

d.Place the router in a location away from other electronics, motors, and fluorescent lighting.

e.Many environmental variables can affect the router’s performance, so if your wireless signal is weak, place the router in several locations and test the signal strength to determine the ideal position.

If possible, upgrade wireless network interfaces (such as wireless cards in computers) from older wireless standards to 802.11n. If a wirelessly networked device uses an older standard, the performance of the entire wireless network may be slower. If you are still experiencing low or no signal consider repositioning the wireless devices or installing additional access point.

TEW-MFP1

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

© Copyright 2012 TRENDnet. All Rights Reserved.

25

Page 26 Page 28
Page 27
Image 27
TRENDnet 1-Port Wireless N Multi-Function USB Print Server manual Federal Communication Commission Interference Statement
Page 26 Page 28

1-Port Wireless N Multi-Function USB Print Server, TEW-MFP1 specifications

The TRENDnet TEW-MFP1 is a versatile 1-Port Wireless N Multi-Function USB Print Server that allows users to integrate USB printers and multi-function devices into a wireless network with ease. This device is particularly suited for home offices or small businesses that require seamless printing capabilities from multiple devices, including computers and mobile devices.

One of the standout features of the TEW-MFP1 is its support for Wireless N technology, which delivers high-speed wireless performance of up to 300 Mbps. This ensures that print jobs are transferred quickly and efficiently, reducing wait times when sending documents from a PC or laptop to the printer. The device operates over a 2.4 GHz frequency, which is widely supported by most wireless routers, making it easy to implement in various network environments.

The print server is equipped with a USB 2.0 port, allowing users to connect a variety of USB printers and multi-function devices. This functionality promotes shared printing without the need for additional cables or direct connections to a computer. As a multi-function device, the TEW-MFP1 supports printing, scanning, and faxing, making it an essential tool for any office setup.

Another notable characteristic of the TEW-MFP1 is its user-friendly setup process. The device can be configured quickly through a web interface, ensuring that even users with limited technical knowledge can establish the print server without any complications. Furthermore, the print server is compatible with various operating systems, including Windows, macOS, and Linux, which adds to its flexibility.

The TRENDnet TEW-MFP1 also features robust security protocols, including WEP, WPA, and WPA2 encryption, ensuring that sensitive documents are safely transmitted over the network. Additionally, it supports the use of IP filtering, which enables administrators to manage access control effectively.

In summary, the TRENDnet TEW-MFP1 Multi-Function USB Print Server is a reliable solution for those looking to enhance their printing capabilities within a wireless environment. With its combination of Wireless N technology, support for multi-function devices, easy setup, and robust security features, it is well-suited for both personal and professional use. By streamlining the printing process and eliminating the need for physical connections, the TEW-MFP1 is an excellent investment for anyone seeking to improve workplace efficiency.
Top Page Image Contents