Congratulations on your purchase of a quality Orion telescope. Your new Atlas 10 EQ is designed for
These instructions will help you set up and properly use your telescope. Please read them over thor‑ oughly before getting started.
Table of Contents
1. Unpacking . . . . . . . . . . . . 3
2. Parts List . . . . . . . . . . . . 3
3.Assembly . . . . . . . . . . . . 3
4.Balancing the Telescope . . . . . . 5
5.Using Your Telescope . . . . . . . . 6
6.Setting Up and Using the
Equatorial Mount . . . . . . . . . 7
7.Collimating . . . . . . . . . . . 12
8.Astronomical Observing . . . . . . 14
9.Astrophotography . . . . . . . . . 17
10.Care and Maintenance . . . . . . 18
11.Specifications . . . . . . . . . . 19
1.Unpacking
The entire telescope will arrive in three boxes, one contain‑ ing the tripod, one containing the equatorial mount, and the third box containing the optical tube. Be careful unpacking the boxes. We recommend keeping the boxes and original pack‑ aging. In the event that the telescope needs to be shipped to another location, or returned to Orion for warranty repair, hav‑ ing the proper packaging will ensure that your telescope will survive the journey intact.
Make sure all the parts in the Parts List are present. Be sure to check each box carefully, as some parts are small.
If anything appears to be missing or broken, immediate‑ ly call Orion Customer Support
2. Parts List
Box #1
1 Tripod
3 Counterweights
1Tripod support tray
Box #2
1Equatorial mount
1Hand controller
1Battery pack
1Nylon
Box #3
1Optical tube
2Tube rings
1 Tube ring mounting plate
125mm Sirius Plössl eyepiece
110mm Sirius Plössl eyepiece
19x50 Finder scope
1Finder scope bracket with
1Collimation cap
1Camera adapter
1Dust cover
Warning: Never look directly at the Sun through your telescope or its finder
3. Assembly
1.Stand the tripod legs upright and spread the legs out as far as they will go. Make certain that the leg lock levers are tightened. Assembly should take no more than 30 minutes. Refer to Figure 1 during assembly. Assembling the tele‑ scope requires no tools other than the ones provided.
2.Place the base of the equatorial mount onto the tripod head. Orient the equatorial mount so that the post on the tripod head lines up with the azimuth adjustment knobs on the equatorial mount (Figure 2). You may need to loosen
3