TRENDnet TEW-P1PG manual Installing PS-Utility, Using PS-Utility

PS-Utility

To avoid the conflict in your network, you can use PS-Utility to change the related settings of your print server (such as the IP address) after finishing the installation.

Installing PS-Utility

1.Click Install Utility from the Auto-Run menu screen. Once executed, the Setup program will extract files to launch the InstallShield Wizard; then, click Next > in the welcome screen of InstallShield Wizard.

2.Choose the destination location. If no specific requirement, leave the default setting and click Next >.

- 15 -

3.The InstallShield Wizard starts to install the software, and the Progress bar indicates the installation is proceeding.

4.When completed, click Finish.

After installing the utility, the application program for the print server is automatically installed to your computer, and creates a folder in

Start\Programs\PS-Utility.

Using PS-Utility

This section describes the operation of PS-Utility. To launch PS- Utility:

1.Click Start -> Programs -> PS-Utility, and then click the PS- Utility v2.00 item.

- 16 -